SAFETYREADY FOR ANYTHING

SUPER WIDE RANGE HID HEADLAMPS

What you can’t see, can hurt you. To take more of the road out of the shadows, ASX features Super Wide Range HID (High Intensity Discharge) headlamps. When activated, the headlamp clusters send out broader beams of light, illuminating a much wider section of the road ahead.

7-AIRBAG SYSTEM

So that you and your passengers can be safer in the event of a collision, ASX is equipped with a 7-airbag system to provide increased safety to every seat. The front seats are protected by front airbags, plus an additional knee airbag for the driver to help protect the legs in a forward collision. In a side collision, occupants in both rows are protected by curtain airbags extending along the sides.

Note: 7-Airbag System is optional. Equipment may vary from the image shown. Airbags are part of a Supplemental Restraint System (SRS). To decrease the risk of injury from a deploying airbag, always wear your seat belt, sit upright in the middle of the seat and do not lean against the door. Always place children 12 and under in the rear seat and use appropriate child restraints. Never place a rear-facing infant restraint in the front seat. Please see the owner’s manual and the instructions provided with your child restraint for additional information.

FORWARD COLLISION MITIGATION SYSTEM (FCM)

Helps prevent a frontal collision or reduce damage if the collision becomes unavoidable. Responds to vehicles and pedestrians via camera and laser radar.

Note: The detection and control capabilities of Forward Collision Mitigation (FCM) are supplemental only and do not prevent collisions in every situation. Please drive safely and do not rely solely on this system while driving. When the driving speed gap between your car and the car ahead exceeds 30km/h, FCM cannot avoid a collision but will sound an alarm to warn the driver of the danger of the collision. Since FCM has no function to maintain braking, the brake is released approximately 2 seconds after stopping. To prevent the vehicle from rolling thereafter, the driver may have to hold the brake pedal down. In some cases, FCM may not function if the driver takes actions for accident avoidance through steering or acceleration operation. Please see your owner’s manual for additional information.

LANE DEPARTURE WARNING (LDW)

This feature beeps and displays a warning if the vehicle drifts from its lane while the turn signals are not operating.

Note: Lane Departure Warning is not designed to lessen risks associated with not looking ahead carefully (attention drawn to something on the side, absentmindedness, etc.) or poor visibility caused by bad weather etc. Keep steering your vehicle correctly and drive safely. The system may not be able to detect the lane correctly in some conditions. Please see the owner’s manual for additional information.

AUTOMATIC HIGH-BEAM (AHB)

To increase safety, comfort and driving ease at night, the high beams automatically switch to low beams when vehicles are detected ahead and automatically switch back to high beams so you don’t have to remove your hand from the steering wheel to switch the beams manually.

Note: Automatic high beams may not be available under some road and weather conditions.

ACTIVE STABILITY CONTROL (ASC)

STABILITY CONTROL FUNCTION
ASC uses onboard sensors to analyze the vehicle’s motion and identify lateral wheel slippage. By governing engine output and controlling braking to the appropriate wheels, ASC helps maintain stability and traction control.





TRACTION CONTROL FUNCTION (TCL)
When wheel spin is detected, engine output is governed and braking force is applied to the spinning wheels to prevent driving torque loss.

Note: The control capabilities of ASC/TCL are supplemental only. Please drive safely and never rely solely on these functions while driving. Be sure to use the same specified type and size of tires on all 4 wheels. Do not install any aftermarket limited slip differential on your vehicle. Please see the owner’s manual for additional information.

ACTIVE STABILITY CONTROL (ASC)

STABILITY CONTROL FUNCTION
ASC uses onboard sensors to analyze the vehicle’s motion and identify lateral wheel slippage. By governing engine output and controlling braking to the appropriate wheels, ASC helps maintain stability and traction control.



TRACTION CONTROL FUNCTION
When wheel spin is detected, engine output is governed and braking force is applied to the spinning wheels to prevent driving torque loss.

HILL START ASSIST (HSA)

HSA prevents the vehicle from rolling backward by automatically braking when starting on an uphill slope.

Note: Hill Start Assist (HSA) is not a substitute for safe driving. Never rely solely on this function while driving on steep roads. Your vehicle may move backwards if the brake pedal is heavily loaded, or if road is very steep or slippery. This function is not designed to keep the vehicle stopped in place on uphill slopes for more than 2 seconds. Do not rely on this function to maintain a stopped position as an alternative to depressing the brake pedal. Please see the owner’s manual for additional information.

Note: Equipment may vary by market. Please consult your local Mitsubishi Motors dealer/distributor for details.
Images are provided for reference only.

FIND YOUR LOCAL MITSUBISHI MOTORS WEBSITE
NORTH AMERICA
LATIN AMERICA
EUROPE
AFRICA
MIDDLE EAST
ASIA
OCEANIA
  • Facebook
  • Instagram
  • YouTube